CISCO-ATM-RM-MIB :: rmIfScRxDynBwSvcAcr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfScRxDynBwSvcAcr

rmIfScRxDynBwSvcAcr

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfScRxDynBwSvcAcr

OID (numeric): 1.3.6.1.4.1.9.10.10.1.4.1.1.12

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The Available Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This object is valid only for IMA physical interfaces. This is the bandwidth available for SVC connections. For CBR and VBR Service Categories, this value decreases as a result of connection setup and increases as a result of connection release. For ABR and UBR Service Categories, this value changes as a result of connection setup and teardown only if non-zero mcr is specified

What is rmIfScRxDynBwSvcAcr?

Reports the Available Cell Rate, in cells per second, for incoming traffic on an IMA physical interface for a given Service Category, representing bandwidth available for admitting new SVC connections.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.12
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScRxDynBwSvcAcr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.4.1.1.12.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfScRxDynBwSvcAcr.1

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfScRxDynBwSvcAcr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4ciscoAtmRmIfStateCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1rmIfServiceCategoryStateTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1.1rmIfServiceCategoryStateEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.4.1.1.12rmIfScRxDynBwSvcAcrCISCO-ATM-RM-MIB