All MIBs › CISCO-ATM-RM-MIB › rmIfOutPacingRateRequested
rmIfOutPacingRateRequested
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfOutPacingRateRequested
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object reflects an explicit configuration of the state of pacing for this interface. If the value of this object is 0, pacing is disabled on this interface. Prior to any user configuration, the value of this object is 0. If the value not 0, it represents the output pacing value, in kilobits per second. The hardware is not capable of providing all possible rates. The rate in place is available in rmIfOutPacingRateInstalled. If the value specified would reduce the port rate below that currently allocated to Guaranteed Service bandwidth for the output flow, the rmIfOutPacingForce object must be set in conjunction with this object in order to cause the change to take effect.
What is rmIfOutPacingRateRequested?
Read-write requested output pacing rate for an interface; a value of 0 means pacing is disabled, otherwise it configures a throttled output rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.1 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfOutPacingRateRequested
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.1.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfOutPacingRateRequested.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.1.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfOutPacingRateRequested OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.1 | rmIfOutPacingRateRequested | CISCO-ATM-RM-MIB |