CISCO-ATM-RM-MIB :: rmIfOutPacingForce

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfOutPacingForce

rmIfOutPacingForce

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfOutPacingForce

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.3

Node type: OBJECT-TYPE

Type: ForceValue

Access: read-write

Description: A Set Request for rmIfOutPacingRateRequested that does not reduce the port rate below the currently allocated bandwidth guarantees for the output flow always succeeds irrespective of the value of rmIfOutPacingForce. But a Set Request for rmIfOutPacingRateRequested that does reduce the port rate below the currently allocated bandwidth guarantees for the output flow will succeed only if rmIfOutPacingForce object is also set to the value forceChange. In either of the above cases, once rmIfOutPacingRateRequested object is set to the appropriate value, rmIfOutPacingForce object assumes the noForceChange value. This object is not instantiated for interfaces to which it cannot be applied.

What is rmIfOutPacingForce?

Read-write flag controlling whether a request to lower the interface pacing rate below currently allocated bandwidth guarantees is forced through or rejected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.3
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfOutPacingForce

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.3.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfOutPacingForce.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.3.1 s <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfOutPacingForce OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3rmIfCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3.1rmIfCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3.1.3rmIfOutPacingForceCISCO-ATM-RM-MIB