All MIBs › CISCO-ATM-RM-MIB › rmIfFramingOverheadForce
rmIfFramingOverheadForce
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfFramingOverheadForce
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.15
Node type: OBJECT-TYPE
Type: ForceValue
Access: read-write
Description: A Set Request for rmIfFramingOverhead that does not reduce the Maximum Guaranteed Services Bandwidth of this interface below the currently allocated bandwidth guarantees always succeeds irrespective of the value of rmIfFramingOverheadForce. But a Set Request for rmIfFramingOverhead that does reduce the Maximum Guaranteed Services Bandwidth of this interface below the currently allocated bandwidth guarantees will succeed only if rmIfFramingOverheadForce object is also set to the value forceChange. In either of the above cases, once the rmIfFramingOverhead object is set to the appropriate value, rmIfFramingOverheadForce object assumes the noForceChange value. This object is not instantiated for interfaces to which it cannot be applied.
What is rmIfFramingOverheadForce?
Controls whether a change to rmIfFramingOverhead is forced through even if it would reduce the interface's Maximum Guaranteed Services Bandwidth below currently allocated guarantees, otherwise such a change would be rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.15 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfFramingOverheadForce
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.15.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfFramingOverheadForce.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.15.1 s <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfFramingOverheadForce OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.15 | rmIfFramingOverheadForce | CISCO-ATM-RM-MIB |