All MIBs › CISCO-ATM-RM-MIB › rmIfFramingOverhead
rmIfFramingOverhead
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfFramingOverhead
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.14
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: If this object is set to true, framing overhead will be taken into account in determining the Maximum Cell Rate that is possible on this interface. If this object is set to false, framing overhead will not figure in the determination of the Maximum Cell Rate that is possible on this interface. If setting the value of this object to true results in reducing the Maximum Guaranteed Services Bandwidth of this interface below the currently allocated bandwidth guarantees on this interface, the object rmIfFramingOverheadForce must also be set in order to cause the change to take effect. This object is not instantiated for interfaces to which it cannot be applied.
What is rmIfFramingOverhead?
A boolean control that determines whether transmission framing overhead is factored into the calculation of the interface's Maximum Cell Rate; enabling it reduces the usable ATM bandwidth to account for framing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.14 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfFramingOverhead
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.14.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfFramingOverhead.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.14.1 s <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfFramingOverhead OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3 | rmIfCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1 | rmIfCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.3.1.14 | rmIfFramingOverhead | CISCO-ATM-RM-MIB |