CISCO-ATM-RM-MIB :: rmIfDirMaxVbrScr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfDirMaxVbrScr

rmIfDirMaxVbrScr

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirMaxVbrScr

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.10

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Specifies the maximum Sustained-cell-rate (scr) traffic parameter that can be specified for VBR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables checking of this parameter limit. Note that a change to this value affects subsequent connection setup, not existing connections.

What is rmIfDirMaxVbrScr?

Sets the maximum Sustained Cell Rate (in cells per second) that can be requested for VBR connections in a given traffic direction on the interface; a value of 4294967295 disables this limit check.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.10
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirMaxVbrScr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.10.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirMaxVbrScr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.10.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirMaxVbrScr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4rmIfDirectionCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1rmIfDirectionCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1.10rmIfDirMaxVbrScrCISCO-ATM-RM-MIB