CISCO-ATM-RM-MIB :: rmIfDirControlLinkShareMinCbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfDirControlLinkShareMinCbr

rmIfDirControlLinkShareMinCbr

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMinCbr

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of CBR traffic that can be reserved in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction's bandwidth (applies after output pacing, for example). This object interacts with MinVbr, MinAbr, MinUbr (if specified) such that MinVbr + MinCbr + MinAbr + MinUbr <= 95%. This object interacts with MaxCbr (if specified) such that MinCbr < MaxCbr. Note that a change to this value affects subsequent connection setup, not existing connections. If the object is set to -1, the object is considered to be unspecified. This object is not instantiated for interfaces to which it cannot be applied.

What is rmIfDirControlLinkShareMinCbr?

Part of the Controller Link Sharing (CLS) scheme; specifies the minimum percentage of the traffic direction's bandwidth reserved for CBR traffic on the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.3
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMinCbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.3.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMinCbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.3.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMinCbr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4rmIfDirectionCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1rmIfDirectionCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1.3rmIfDirControlLinkShareMinCbrCISCO-ATM-RM-MIB