All MIBs › CISCO-ATM-RM-MIB › rmIfDirControlLinkShareMaxVbr
rmIfDirControlLinkShareMaxVbr
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxVbr
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum VBR traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction's bandwidth (applies after output pacing, for example). This object interacts with MinVbr (if specified) such that MinVbr <= MaxVbr. This object interacts with MaxAgg (if specified) such that MaxVbr <= MaxAgg. Note that a change to this value affects subsequent connection setup, not existing connections. If the object is set to -1, the object is considered to be unspecified. This object is not instantiated for interfaces to which it cannot be applied.
What is rmIfDirControlLinkShareMaxVbr?
Part of the Controller Link Sharing (CLS) scheme; specifies the maximum percentage of the traffic direction's bandwidth that can be allocated to VBR traffic on the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.6 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxVbr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.6.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxVbr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.6.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxVbr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4 | rmIfDirectionCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4.1 | rmIfDirectionCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.6 | rmIfDirControlLinkShareMaxVbr | CISCO-ATM-RM-MIB |