CISCO-ATM-RM-MIB :: rmIfDirControlLinkShareMaxUbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfDirControlLinkShareMaxUbr

rmIfDirControlLinkShareMaxUbr

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxUbr

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum UBR plus traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction's bandwidth (applies after output pacing, for example). This object interacts with MinUbr (if specified) such that MinUbr <= MaxUbr. This object interacts with MaxAgg (if specified) such that MaxUbr <= MaxAgg. Note that a change to this value affects subsequent connection setup, not existing connections. If the object is set to -1, the object is considered to be unspecified. This object is not instantiated for interfaces to which it cannot be applied.

What is rmIfDirControlLinkShareMaxUbr?

A read-write setting in the Controller Link Sharing scheme that caps the maximum percentage of interface bandwidth allocatable to UBR+ traffic in a given traffic direction.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.22
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxUbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.22.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxUbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.22.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxUbr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4rmIfDirectionCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1rmIfDirectionCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1.22rmIfDirControlLinkShareMaxUbrCISCO-ATM-RM-MIB