CISCO-ATM-RM-MIB :: rmIfDirControlLinkShareMaxCbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfDirControlLinkShareMaxCbr

rmIfDirControlLinkShareMaxCbr

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxCbr

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum CBR traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction's bandwidth (applies after output pacing, for example). This object interacts with MinCbr (if specified) such that MinCbr <= MaxCbr. This object interacts with MaxAgg (if specified) such that MaxCbr <= MaxAgg. Note that a change to this value affects subsequent connection setup, not existing connections. This object is not instantiated for interfaces to which it cannot be applied.

What is rmIfDirControlLinkShareMaxCbr?

Part of the Controller Link Sharing (CLS) scheme; specifies the maximum percentage of the traffic direction's bandwidth that can be allocated to CBR traffic on the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.4
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxCbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.4.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxCbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.4.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxCbr OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4rmIfDirectionCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1rmIfDirectionCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.4.1.4rmIfDirControlLinkShareMaxCbrCISCO-ATM-RM-MIB