All MIBs › CISCO-ATM-RM-MIB › rmIfDirControlLinkShareMaxAgg
rmIfDirControlLinkShareMaxAgg
Module: CISCO-ATM-RM-MIB
OID (symbolic): CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxAgg
OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum aggregate Guaranteed Service (CBR or VBR) traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction's bandwidth (applies after output pacing, for example). This object interacts with MaxVbr (if specified) such that MaxVbr <= MaxAgg. This object interacts with MaxCbr (if specified) such that MaxCbr <= MaxAgg. This object interacts with MaxAbr (if specified) such that MaxAbr <= MaxAgg. This object interacts with MaxUbr (if specified) such that MaxUbr <= MaxAgg. Note that a change to this value affects subsequent connection setup, not existing connections. If the object is set to -1, the object is considered to be unspecified. This object is not instantiated for interfaces to which it cannot be applied.
What is rmIfDirControlLinkShareMaxAgg?
Part of the Controller Link Sharing (CLS) bandwidth allocation scheme; specifies the maximum aggregate percentage of guaranteed-service (CBR/VBR) traffic that may be allocated in one traffic direction on the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.2 snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxAgg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.2.1 snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxAgg.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.4.1.2.1 i <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfDirControlLinkShareMaxAgg OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.10 | ciscoAtmRmMIB | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1 | ciscoAtmRmMIBObjects | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3 | ciscoAtmRmIfCfg | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4 | rmIfDirectionCfgTable | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4.1 | rmIfDirectionCfgEntry | CISCO-ATM-RM-MIB |
| 1.3.6.1.4.1.9.10.10.1.3.4.1.2 | rmIfDirControlLinkShareMaxAgg | CISCO-ATM-RM-MIB |