CISCO-ATM-RM-MIB :: rmIfAbrPerClassOverbooking

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBrmIfAbrPerClassOverbooking

rmIfAbrPerClassOverbooking

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::rmIfAbrPerClassOverbooking

OID (numeric): 1.3.6.1.4.1.9.10.10.1.3.3.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the Per Class Overbooking percentage for ABR service category on this interface. If the value of this object is 100, Per Class Overbooking for ABR is disabled on this interface. Specifying a value that is greater than 100 causes the CAC to scale down the bandwidth allocated to a ABR VC on this interface by a factor that is equal to the inverse of the overbooking percentage specified by this object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down' and Interface overbooking (rmIfOverBooking object) is disabled. A set request for this object will not succeed if it specifies a value that would cause the current bandwidth guarantees on this interface to exceed the maximum bandwidth available for guaranteed services on this interface.

What is rmIfAbrPerClassOverbooking?

Sets the per-class overbooking percentage specifically for the ABR service category on the interface; a value of 100 disables overbooking for that class.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.19
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfAbrPerClassOverbooking

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.19.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::rmIfAbrPerClassOverbooking.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.3.3.1.19.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::rmIfAbrPerClassOverbooking OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3ciscoAtmRmIfCfgCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3rmIfCfgTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3.1rmIfCfgEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.3.3.1.19rmIfAbrPerClassOverbookingCISCO-ATM-RM-MIB