CISCO-ATM-RM-MIB :: lsPerVcqRmThreshGrpQMaxSize

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-RM-MIBlsPerVcqRmThreshGrpQMaxSize

lsPerVcqRmThreshGrpQMaxSize

Module: CISCO-ATM-RM-MIB

OID (symbolic): CISCO-ATM-RM-MIB::lsPerVcqRmThreshGrpQMaxSize

OID (numeric): 1.3.6.1.4.1.9.10.10.1.7.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object reflects an explicit configuration of the maximum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. A connection queue that is a member of this Threshold Group will never have more cells resident in it than this limit. This is the queue limit applied when the Threshold Group is uncongested. The QMaxSize must be greater than or equal to the Threshold Group QMinSize. QMaxSize should be less than MaxSize for the Threshold Group.

While any integer in the range can be set, the hardware granularity is in 16-cell units. Therefore, the largest possible queue size installed is: [(value / 16) * 16]+15

What is lsPerVcqRmThreshGrpQMaxSize?

Read-write configuration of the maximum cell limit for individual connection queues belonging to this Threshold Group, capping how large any single member queue can grow.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.7.1.1.3
snmpwalk -v2c -c public <target> CISCO-ATM-RM-MIB::lsPerVcqRmThreshGrpQMaxSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.10.1.7.1.1.3.1
snmpget -v2c -c public <target> CISCO-ATM-RM-MIB::lsPerVcqRmThreshGrpQMaxSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.10.1.7.1.1.3.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-RM-MIB::lsPerVcqRmThreshGrpQMaxSize OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.10ciscoAtmRmMIBCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1ciscoAtmRmMIBObjectsCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.7ciscoLsPerVcqAtmRmSwitchCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.7.1lsPerVcqRmThreshGrpTableCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.7.1.1lsPerVcqRmThreshGrpEntryCISCO-ATM-RM-MIB
1.3.6.1.4.1.9.10.10.1.7.1.1.3lsPerVcqRmThreshGrpQMaxSizeCISCO-ATM-RM-MIB