All MIBs › CISCO-ATM-NETWORK-CLOCK-MIB › cncNcdpHoldTime
cncNcdpHoldTime
Module: CISCO-ATM-NETWORK-CLOCK-MIB
OID (symbolic): CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpHoldTime
OID (numeric): 1.3.6.1.4.1.9.9.121.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The delay between the transmission of NCDP configuration PDUs.
The hold time is used to limit the transmission of NCDP configuration PDUs out of an interface to a maximum of one configuration PDU per hold time interval per interface.
The value of this object should normally be set to match the value of cncNcdpMessageInterval. If the value of this object is higher than the value of cncNcdpMessageInterval, NCDP configuration PDUs will end up being propagated at the rate specified by the value of this object instead.
This object is only used by the NCDP protocol entity.
What is cncNcdpHoldTime?
This read-write object sets the minimum delay between transmissions of NCDP configuration PDUs on an interface, limiting message rate to at most one PDU per hold-time interval.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.121.1.1.6 snmpwalk -v2c -c public <target> CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.121.1.1.6.1 snmpget -v2c -c public <target> CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpHoldTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.121.1.1.6.1 i <value>
Start monitoring Cisco ATM/TDM switch or router (network clock) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-NETWORK-CLOCK-MIB::cncNcdpHoldTime OID value, configure state conditions and alerts, and monitor any Cisco ATM/TDM switch or router (network clock) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.121 | ciscoAtmNetworkClockMIB | CISCO-ATM-NETWORK-CLOCK-MIB |
| 1.3.6.1.4.1.9.9.121.1 | ciscoAtmNetworkClockMIBObjects | CISCO-ATM-NETWORK-CLOCK-MIB |
| 1.3.6.1.4.1.9.9.121.1.1 | cncGlobal | CISCO-ATM-NETWORK-CLOCK-MIB |
| 1.3.6.1.4.1.9.9.121.1.1.6 | cncNcdpHoldTime | CISCO-ATM-NETWORK-CLOCK-MIB |