All MIBs › CISCO-ATM-IF-PHYS-MIB › ciscoAtmIfPhysTransmitClockSource
ciscoAtmIfPhysTransmitClockSource
Module: CISCO-ATM-IF-PHYS-MIB
OID (symbolic): CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysTransmitClockSource
OID (numeric): 1.3.6.1.4.1.9.9.45.1.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The source of the tranmit clock:
'loopTiming' indicates that the recovered receive clock is used as the transmit clock.
'freeRunning' indicates that a local clock source is used.
'networkDerived' indicates that recovered receive clock from another interface is used as the transmit clock source.
What is ciscoAtmIfPhysTransmitClockSource?
This read-write object selects the source of the transmit clock on the physical interface, such as loop timing (derived from received signal), a free-running local clock, or a network-derived clock.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.16 snmpwalk -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysTransmitClockSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.16.1 snmpget -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysTransmitClockSource.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.45.1.1.1.16.1 i <value>
Start monitoring Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysTransmitClockSource OID value, configure state conditions and alerts, and monitor any Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1 | ciscoAtmIfPhysMIBObjects | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1 | ciscoAtmIfPhysTable | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1 | ciscoAtmIfPhysEntry | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1.16 | ciscoAtmIfPhysTransmitClockSource | CISCO-ATM-IF-PHYS-MIB |