All MIBs › CISCO-ATM-IF-PHYS-MIB › ciscoAtmIfPhysLoopbackConfig
ciscoAtmIfPhysLoopbackConfig
Module: CISCO-ATM-IF-PHYS-MIB
OID (symbolic): CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLoopbackConfig
OID (numeric): 1.3.6.1.4.1.9.9.45.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The loopback configured on the physical interface:
'noLoop' indicates no loopback is present.
'diagnosticLoop' indicates transmit data stream is looped to the receive direction.
'lineLoop' indicates receive data stream is looped to the transmit direction.
'otherLoop' indicates loopbacks that are not defined here.
What is ciscoAtmIfPhysLoopbackConfig?
This read-write object configures the loopback mode on the physical interface, such as no loopback, diagnostic loopback (transmit looped to receive), or line loopback (receive looped back), for testing and troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.14 snmpwalk -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLoopbackConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.14.1 snmpget -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLoopbackConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.45.1.1.1.14.1 i <value>
Start monitoring Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLoopbackConfig OID value, configure state conditions and alerts, and monitor any Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1 | ciscoAtmIfPhysMIBObjects | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1 | ciscoAtmIfPhysTable | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1 | ciscoAtmIfPhysEntry | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1.14 | ciscoAtmIfPhysLoopbackConfig | CISCO-ATM-IF-PHYS-MIB |