All MIBs › CISCO-ATM-IF-PHYS-MIB › ciscoAtmIfPhysLineBuildOut
ciscoAtmIfPhysLineBuildOut
Module: CISCO-ATM-IF-PHYS-MIB
OID (symbolic): CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLineBuildOut
OID (numeric): 1.3.6.1.4.1.9.9.45.1.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The line buildout configured on the transmit signal:
'e3AllCables' applies to all cables of E3 physical interfaces.
'ds3CablesUnder225' applies to cables under 225 feet of DS3 physical interfaces.
'ds3CablesOver225' applies to cables over 225 feet of DS3 physical interfaces.
'ds1Cables0To110' applies to cables 0 to 110 feet of DS1 physical interfaces.
'ds1Cables110To220' applies to cables 110 to 220 feet of DS1 physical interfaces.
'ds1Cables220To330' applies to cables 220 to 330 feet of DS1 physical interfaces.
'ds1Cables330To440' applies to cables 330 to 440 feet of DS1 physical interfaces.
'ds1Cables440To550' applies to cables 440 to 550 feet of DS1 physical interfaces.
'ds1Cables550To660' applies to cables 550 to 660 feet of DS1 physical interfaces.
'ds1CablesOver600' applies to cables over 600 feet of DS1 physical interfaces.
'e1AllCables' applies to all cables of E1 physical interfaces.
What is ciscoAtmIfPhysLineBuildOut?
This read-write object configures the transmit line buildout setting (cable length/attenuation compensation) for E3 or DS3 physical interfaces, such as cable distance categories under or over 225 feet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.15 snmpwalk -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLineBuildOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.15.1 snmpget -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLineBuildOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.45.1.1.1.15.1 i <value>
Start monitoring Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysLineBuildOut OID value, configure state conditions and alerts, and monitor any Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1 | ciscoAtmIfPhysMIBObjects | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1 | ciscoAtmIfPhysTable | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1 | ciscoAtmIfPhysEntry | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1.15 | ciscoAtmIfPhysLineBuildOut | CISCO-ATM-IF-PHYS-MIB |