All MIBs › CISCO-ATM-IF-PHYS-MIB › ciscoAtmIfPhysFramingMode
ciscoAtmIfPhysFramingMode
Module: CISCO-ATM-IF-PHYS-MIB
OID (symbolic): CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysFramingMode
OID (numeric): 1.3.6.1.4.1.9.9.45.1.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The framing format present on the physical interface.
'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-12 type interfaces, respectively.
'sdh' indicates stm1 or stm4 format and applies only to OC-3 and OC-12 type interfaces, respectively.
'ds3m23adm' indicates M23 ADM mode and applies only to DS3 type interfaces.
'ds3m23plcp' indicates M23 PLCP mode and applies only to DS3 type interfaces.
'ds3cbitadm' indicates C-BIT ADM mode and applies only to DS3 type interfaces.
'ds3cbitplcp' indicates C-BIT PLCP mode and applies only to DS3 type interfaces.
'e3g832adm' indicates G.832 ADM mode and applies only to E3 type interfaces.
'e3g751adm' indicates G.751 ADM mode and applies only to E3 type interfaces.
'e3g751plcp' indicates G.751 PLCP mode and applies only to E3 type interfaces.
'ds1sfadm' indicates DS1 SF ADM mode and applies only to DS1 type interfaces.
'ds1esfadm' indicates DS1 ESF ADM mode and applies only to DS1 type interfaces.
'ds1sfplcp' indicates DS1 SF PLCP mode and applies only to DS1 type interfaces.
'ds1esfplcp' indicates DS1 ESF PLCP mode and applies only to DS1 type interfaces.
'e1adm' indicates E1 ADM mode and applies only to E1 type interfaces.
'e1plcp' indicates E1 PLCP mode and applies only to E1 type interfaces.
'e1crcadm' indicates E1 CRC-4 ADM mode and applies only to E1 type interfaces.
'e1crcplcp' indicates E1 CRC-4 PLCP mode and applies only to E1 type interfaces.
What is ciscoAtmIfPhysFramingMode?
This read-write object configures the framing format (e.g., SONET STS-3c/STS-12c or SDH STM1/STM4) used on OC-3 or OC-12 ATM physical interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.13 snmpwalk -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysFramingMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.13.1 snmpget -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysFramingMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.45.1.1.1.13.1 i <value>
Start monitoring Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysFramingMode OID value, configure state conditions and alerts, and monitor any Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1 | ciscoAtmIfPhysMIBObjects | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1 | ciscoAtmIfPhysTable | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1 | ciscoAtmIfPhysEntry | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1.13 | ciscoAtmIfPhysFramingMode | CISCO-ATM-IF-PHYS-MIB |