All MIBs › CISCO-ATM-IF-PHYS-MIB › ciscoAtmIfPhysDS1BitErrors
ciscoAtmIfPhysDS1BitErrors
Module: CISCO-ATM-IF-PHYS-MIB
OID (symbolic): CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysDS1BitErrors
OID (numeric): 1.3.6.1.4.1.9.9.45.1.1.1.19
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces.
What is ciscoAtmIfPhysDS1BitErrors?
This read-only counter reports the number of bit errors (CRC-6 in ESF mode or framing bit errors in SF mode) detected on a DS1 physical interface, used to gauge line quality.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.19 snmpwalk -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysDS1BitErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.45.1.1.1.19.1 snmpget -v2c -c public <target> CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysDS1BitErrors.1
Start monitoring Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysDS1BitErrors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with DS1/DS3/E1/E3/SONET ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.45 | ciscoAtmIfPhysMIB | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1 | ciscoAtmIfPhysMIBObjects | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1 | ciscoAtmIfPhysTable | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1 | ciscoAtmIfPhysEntry | CISCO-ATM-IF-PHYS-MIB |
| 1.3.6.1.4.1.9.9.45.1.1.1.19 | ciscoAtmIfPhysDS1BitErrors | CISCO-ATM-IF-PHYS-MIB |