All MIBs › CISCO-802-TAP-MIB › c802tapStreamCapabilities
c802tapStreamCapabilities
Module: CISCO-802-TAP-MIB
OID (symbolic): CISCO-802-TAP-MIB::c802tapStreamCapabilities
OID (numeric): 1.3.6.1.4.1.9.9.395.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object displays what types of intercept streams can be configured on this type of device. This may be dependent on hardware capabilities, software capabilities. The following fields may be supported: tapEnable: set if table entries with cTap2StreamInterceptEnable set to 'false' are used to pre-screen packets for intercept; otherwise these entries are ignored. interface: SNMP ifIndex Value may be used to select interception of all data crossing an interface or set of interfaces. dstMacAddr: Destination MAC Address may be used to select traffic to be intercepted. srcMacAddr: Source MAC Address may be used to select traffic to be intercepted. ethernetPid: Ethernet Protocol Identifier may be used to select traffic to be intercepted. dstLlcSap: IEEE 802.2 Destination SAP may be used to select traffic to be intercepted. srcLlcSap: IEEE 802.2 Source SAP may be used to select traffic to be intercepted.
What is c802tapStreamCapabilities?
A read-only object reporting which lawful-intercept stream configuration capabilities (e.g., tap enable options) the device's hardware/software supports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.395.1.1.1 snmpwalk -v2c -c public <target> CISCO-802-TAP-MIB::c802tapStreamCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.395.1.1.1.1 snmpget -v2c -c public <target> CISCO-802-TAP-MIB::c802tapStreamCapabilities.1
Start monitoring Cisco routers/switches (IEEE 802 Layer 2 lawful intercept) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-802-TAP-MIB::c802tapStreamCapabilities OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (IEEE 802 Layer 2 lawful intercept) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.395 | cisco802TapMIB | CISCO-802-TAP-MIB |
| 1.3.6.1.4.1.9.9.395.1 | cisco802TapMIBObjects | CISCO-802-TAP-MIB |
| 1.3.6.1.4.1.9.9.395.1.1 | c802tapStreamEncodePacket | CISCO-802-TAP-MIB |
| 1.3.6.1.4.1.9.9.395.1.1.1 | c802tapStreamCapabilities | CISCO-802-TAP-MIB |