All MIBs › CISCO-6200-MIB › systemACO
systemACO
Module: CISCO-6200-MIB
OID (symbolic): CISCO-6200-MIB::systemACO
OID (numeric): 1.3.6.1.4.1.9.10.26.1.1.10
Node type: OBJECT-TYPE
Type: CommandValue
Access: read-write
Description: This parameter deactivates the audible alarm at the system. Audible alarm is generated by the system to announce detection of new alarm(s). Once deactivated, system may activate it again if it detects new additional alarm(s).
What is systemACO?
A read-write control used to silence (deactivate) the system's audible alarm after a new fault has been announced; it can reactivate if additional new alarms occur.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.26.1.1.10 snmpwalk -v2c -c public <target> CISCO-6200-MIB::systemACO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.26.1.1.10.1 snmpget -v2c -c public <target> CISCO-6200-MIB::systemACO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.26.1.1.10.1 s <value>
Start monitoring Cisco 6200 series DSLAM (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-6200-MIB::systemACO OID value, configure state conditions and alerts, and monitor any Cisco 6200 series DSLAM (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.26 | cisco6200MIB | CISCO-6200-MIB |
| 1.3.6.1.4.1.9.10.26.1 | cisco6200MibObjects | CISCO-6200-MIB |
| 1.3.6.1.4.1.9.10.26.1.1 | c62System | CISCO-6200-MIB |
| 1.3.6.1.4.1.9.10.26.1.1.10 | systemACO | CISCO-6200-MIB |