CISCO-6200-MIB :: lineTestBitErrRateLimit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-6200-MIBlineTestBitErrRateLimit

lineTestBitErrRateLimit

Module: CISCO-6200-MIB

OID (symbolic): CISCO-6200-MIB::lineTestBitErrRateLimit

OID (numeric): 1.3.6.1.4.1.9.10.26.1.4.3.1.9

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is a positive integer representing a negative exponent of 10. It represents bit error rate limit allowed for the subscriber line quality test. The system compares the bit error rates reported at the end of line quality test to this limit to determine line quality. Allowable error rates are between 10-3 and 10-10. The agent will only change lineTestBitErrRateLimit, if no test is active on the targeted port.

What is lineTestBitErrRateLimit?

A read-write threshold (expressed as a negative exponent of 10) defining the maximum acceptable bit error rate for a subscriber line quality test, used to judge whether the line passes or fails.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.26.1.4.3.1.9
snmpwalk -v2c -c public <target> CISCO-6200-MIB::lineTestBitErrRateLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.26.1.4.3.1.9.1
snmpget -v2c -c public <target> CISCO-6200-MIB::lineTestBitErrRateLimit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.26.1.4.3.1.9.1 i <value>

Start monitoring Cisco 6200 series DSLAM (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-6200-MIB::lineTestBitErrRateLimit OID value, configure state conditions and alerts, and monitor any Cisco 6200 series DSLAM (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.26cisco6200MIBCISCO-6200-MIB
1.3.6.1.4.1.9.10.26.1cisco6200MibObjectsCISCO-6200-MIB
1.3.6.1.4.1.9.10.26.1.4c62LineInterfaceCISCO-6200-MIB
1.3.6.1.4.1.9.10.26.1.4.3lineTestTableCISCO-6200-MIB
1.3.6.1.4.1.9.10.26.1.4.3.1lineTestEntryCISCO-6200-MIB
1.3.6.1.4.1.9.10.26.1.4.3.1.9lineTestBitErrRateLimitCISCO-6200-MIB