All MIBs › CENTRECOM-QOS-MIB › atiQosMode
atiQosMode
Module: CENTRECOM-QOS-MIB
OID (symbolic): CENTRECOM-QOS-MIB::atiQosMode
OID (numeric): 1.3.6.1.4.1.207.8.12.2.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p priority, PACE(tm), Source Port or VLAN. egress(2) applies priority- and bandwidth-based QoS based on destination IP or MAC address or VLAN.
What is atiQosMode?
This selects the switch's overall QoS mode: ingress (1) applies priority-only QoS based on incoming packets' destination IP or MAC address, 802.1p priority tag, PACE, source port, or VLAN, while egress (2) applies combined priority-and-bandwidth QoS based on destination IP or MAC address or VLAN specifically at the outbound side. An admin picks egress mode when actual bandwidth shaping (not just priority ordering) is needed on outbound traffic, since ingress mode only reorders priority without enforcing bandwidth limits. For example, a switch needing to cap a particular VLAN's outbound bandwidth to protect other traffic would need egress mode, since ingress mode alone has no bandwidth-limiting capability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.5.1.4 snmpwalk -v2c -c public <target> CENTRECOM-QOS-MIB::atiQosMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.5.1.4.1 snmpget -v2c -c public <target> CENTRECOM-QOS-MIB::atiQosMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.12.2.5.1.4.1 i <value>
Start monitoring Allied Telesis CentreCOM Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CENTRECOM-QOS-MIB::atiQosMode OID value, configure state conditions and alerts, and monitor any Allied Telesis CentreCOM Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.12 | atkkSwitchMIB | CENTRECOM-MIB |
| 1.3.6.1.4.1.207.8.12.2 | extSwitchMIB | CENTRECOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.5 | atiQos | CENTRECOM-QOS-MIB |
| 1.3.6.1.4.1.207.8.12.2.5.1 | atiQosCommon | CENTRECOM-QOS-MIB |
| 1.3.6.1.4.1.207.8.12.2.5.1.4 | atiQosMode | CENTRECOM-QOS-MIB |