CAMBIUM-PTP800-MIB :: remoteSecondaryIPAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBremoteSecondaryIPAddress

remoteSecondaryIPAddress

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::remoteSecondaryIPAddress

OID (numeric): 1.3.6.1.4.1.17713.8.26.19

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: In a 1+1 Hot Standby configuration, the Remote Secondary IP Address reports the IP address of the CMU which is configured as Secondary at the remote end of the wireless link.

What is remoteSecondaryIPAddress?

In a 1+1 Hot Standby configuration, this reports the IP address of whichever CMU is configured as Secondary at the remote (far) end of the wireless link. It's the counterpart to remotePrimaryIPAddress for the far-end Secondary unit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.26.19
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::remoteSecondaryIPAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.26.19.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::remoteSecondaryIPAddress.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::remoteSecondaryIPAddress OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.26protectionStatusCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.26.19remoteSecondaryIPAddressCAMBIUM-PTP800-MIB