CAMBIUM-PTP800-MIB :: rFURfSwitchCableAlarm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBrFURfSwitchCableAlarm

rFURfSwitchCableAlarm

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::rFURfSwitchCableAlarm

OID (numeric): 1.3.6.1.4.1.17713.8.23.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The RF switch in the IRFU is indicating an invalid switch position. The most likely cause is a fault or a disconnection of the cable which connects the transceiver to the RF switch

What is rFURfSwitchCableAlarm?

This fires when the RF switch in the IRFU reports an invalid switch position, most likely due to a fault or a disconnected cable linking the transceiver to the RF switch. It helps localize RF switch problems to a cabling issue rather than the switch hardware itself.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.23.36
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::rFURfSwitchCableAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.23.36.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::rFURfSwitchCableAlarm.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::rFURfSwitchCableAlarm OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.23rfuCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.23.36rFURfSwitchCableAlarmCAMBIUM-PTP800-MIB