All MIBs › CAMBIUM-PTP800-MIB › rFURFSwitchAlarm

rFURFSwitchAlarm

OID (symbolic): CAMBIUM-PTP800-MIB::rFURFSwitchAlarm

OID (numeric): 1.3.6.1.4.1.17713.8.23.28

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This indicates that an RF switch is not present when it should be or that on the most recent attempt to make this unit active, the IRFU RF Switch was not able to switch to the correct position

What is rFURFSwitchAlarm?

This fires when an RF switch expected to be present in the IRFU isn't detected, or when the IRFU RF switch failed to move to the correct position on the most recent attempt to make this unit active. It's a key diagnostic for troubleshooting failed protection switchovers in IRFU branching configurations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.23.28
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::rFURFSwitchAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.23.28.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::rFURFSwitchAlarm.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::rFURFSwitchAlarm OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.17713	cambium	CAMBIUM-PMP80211-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.17713.8	ptp800	CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.23	rfu	CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.23.28	rFURFSwitchAlarm	CAMBIUM-PTP800-MIB

CAMBIUM-PTP800-MIB :: rFURFSwitchAlarm

rFURFSwitchAlarm

Module

This MIB depends on