CAMBIUM-PTP800-MIB :: rFFeederLoss

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBrFFeederLoss

rFFeederLoss

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::rFFeederLoss

OID (numeric): 1.3.6.1.4.1.17713.8.5.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Insertion loss of the microwave connection between the RFU and the antenna. The feeder loss should be 0 dB for the standard 1 + 0 direct mount configuration. Expressed in 10ths of dB.

What is rFFeederLoss?

This reports the insertion loss of the microwave cable run between the RFU (radio unit) and the antenna, expressed in tenths of a dB. It should read 0 dB for a standard direct-mount 1+0 configuration, so a nonzero value confirms extra feeder cable is in the path; the same figure feeds into the link loss calculation for the wireless link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.5.8
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::rFFeederLoss

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.5.8.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::rFFeederLoss.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::rFFeederLoss OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.5configurationCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.5.8rFFeederLossCAMBIUM-PTP800-MIB