All MIBs › CAMBIUM-PTP800-MIB › protection
protection
Module: CAMBIUM-PTP800-MIB
OID (symbolic): CAMBIUM-PTP800-MIB::protection
OID (numeric): 1.3.6.1.4.1.17713.8.25.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: PTP 800 supports a 1+1 Hot Standby configuration where the wireless link is protected against hardware failure. This requires the installation of redundant equipment at each end of the wireless link including a secondary CMU and RFU. At a given end of the wireless link, only one CMU / RFU is Active at any one time, the neighbor CMU / RFU being Inactive. When a fault is detected on the Active CMU / RFU, the Active role will automatically switch to the Inactive CMU / RFU. To enable functionality associated with this feature, this attribute must be configured for a setting of 1+1.
What is protection?
This selects the protection scheme for the wireless link: disabled, 1+1 Hot Standby, or 1+1 Hot Standby with Rx Diversity. Enabling Hot Standby requires redundant CMU/RFU hardware at each end so that if the Active unit develops a fault, the role automatically switches to the Inactive unit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.25.1 snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::protection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.25.1.1 snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::protection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.17713.8.25.1.1 i <value>
Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::protection OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.8 | ptp800 | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.25 | protectionConfig | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.25.1 | protection | CAMBIUM-PTP800-MIB |