All MIBs › CAMBIUM-PTP800-MIB › primarySecondaryMode
primarySecondaryMode
Module: CAMBIUM-PTP800-MIB
OID (symbolic): CAMBIUM-PTP800-MIB::primarySecondaryMode
OID (numeric): 1.3.6.1.4.1.17713.8.25.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: At a given end of a 1+1 Hot Standby configuration, one CMU must be configured as Primary, the other CMU as Secondary. When a Protected Link initialises with no faults, the CMUs configured as Primary will become the Active CMUs, that is, the Primary CMUs are the preferred CMUs. When RFUs are connected to the antenna via an Asymmetric Coupler, the RFU which is connected to the Primary CMU should be connected to the Main path of the coupler. This is the path with the lowest loss.
What is primarySecondaryMode?
This designates whether this CMU is configured as Primary or Secondary at its end of a 1+1 Hot Standby pair. On initial link-up with no faults, the CMU set as Primary becomes the preferred Active unit; when an Asymmetric Coupler is used, the Primary CMU's RFU should be wired to the coupler's lower-loss Main path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.25.3 snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::primarySecondaryMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.25.3.1 snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::primarySecondaryMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.17713.8.25.3.1 i <value>
Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::primarySecondaryMode OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.8 | ptp800 | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.25 | protectionConfig | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.25.3 | primarySecondaryMode | CAMBIUM-PTP800-MIB |