CAMBIUM-PTP800-MIB :: managementPortForcedConfiguration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBmanagementPortForcedConfiguration

managementPortForcedConfiguration

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::managementPortForcedConfiguration

OID (numeric): 1.3.6.1.4.1.17713.8.6.30

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This forces the configuration of the out-of-band management Ethernet interface rather than using auto negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE Ethernet PORT TO WHICH IT IS CONNECTED IDENTICALLY! WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link)

What is managementPortForcedConfiguration?

This forces the out-of-band management Ethernet interface to a fixed speed/duplex (100 Mbps or 10 Mbps, both full duplex) instead of using auto negotiation. It should only be used if auto negotiation is failing, and the connected port must be configured identically to avoid a duplex mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.30
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::managementPortForcedConfiguration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.30.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::managementPortForcedConfiguration.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::managementPortForcedConfiguration OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6ethernetCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6.30managementPortForcedConfigurationCAMBIUM-PTP800-MIB