CAMBIUM-PTP800-MIB :: managementPortAutoNegAdvertisement

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBmanagementPortAutoNegAdvertisement

managementPortAutoNegAdvertisement

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::managementPortAutoNegAdvertisement

OID (numeric): 1.3.6.1.4.1.17713.8.6.17

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: This sets the different configurations of the out-of-band management Ethernet interface that will be advertised during auto negotiation. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link). WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!

What is managementPortAutoNegAdvertisement?

This is a bitmask setting which speed/duplex options (10 Mbps or 100 Mbps full duplex) the out-of-band management Ethernet interface advertises during auto negotiation. Only options the connected equipment actually supports should be selected to avoid a duplex mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.17
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::managementPortAutoNegAdvertisement

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.17.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::managementPortAutoNegAdvertisement.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.17713.8.6.17.1 s <value>

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::managementPortAutoNegAdvertisement OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6ethernetCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6.17managementPortAutoNegAdvertisementCAMBIUM-PTP800-MIB