All MIBs › CAMBIUM-PTP800-MIB › linkLoss
linkLoss
Module: CAMBIUM-PTP800-MIB
OID (symbolic): CAMBIUM-PTP800-MIB::linkLoss
OID (numeric): 1.3.6.1.4.1.17713.8.12.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Link Loss is a measurement of the loss in signal level as the radio wave propagates between the antennas installed at each end of the link. The Link Loss is only accurate if the Antenna Gain and RF Feeder Loss have been configured correctly at both ends of the link. Expressed in tenths of a dB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.12.5 snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::linkLoss
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.12.5.1 snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::linkLoss.1
Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::linkLoss OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.8 | ptp800 | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.12 | phyStatus | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.12.5 | linkLoss | CAMBIUM-PTP800-MIB |