All MIBs › CAMBIUM-PTP800-MIB › hTTPSAccessEnabled
hTTPSAccessEnabled
Module: CAMBIUM-PTP800-MIB
OID (symbolic): CAMBIUM-PTP800-MIB::hTTPSAccessEnabled
OID (numeric): 1.3.6.1.4.1.17713.8.9.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This controls whether or not HTTPS access is enabled, i.e. if this is disabled (0) then the unit will not respond to any requests on the configured HTTPS Port Number. Remote management via HTTP is not affected by this setting. Any change in this setting will not take effect until the unit has been rebooted. (Factory default = Enabled)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.9.17 snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::hTTPSAccessEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.9.17.1 snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::hTTPSAccessEnabled.1
Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::hTTPSAccessEnabled OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.8 | ptp800 | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.9 | management | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.9.17 | hTTPSAccessEnabled | CAMBIUM-PTP800-MIB |