All MIBs › CAMBIUM-PTP800-MIB › endWirelessReceiveSignalStatus
endWirelessReceiveSignalStatus
Module: CAMBIUM-PTP800-MIB
OID (symbolic): CAMBIUM-PTP800-MIB::endWirelessReceiveSignalStatus
OID (numeric): 1.3.6.1.4.1.17713.8.26.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The End Wireless Receive Signal Status indicates if the end of a link is unable to demodulate the signal transmitted from the remote end of the link. When Protection is set to 1+1 Hot Standby, this attribute will indicate Not Detected if the Active CMU is unable to demodulate the wireless signal. When Receive Diversity is enabled, this attribute will indicate Not Detected if both the Active and Inactive CMUs are unable to demodulate the wireless signal.
What is endWirelessReceiveSignalStatus?
This indicates whether the end of the link as a whole is unable to demodulate the signal from the remote end, accounting for protection: with 1+1 Hot Standby it reflects the Active CMU's ability to demodulate, and with Receive Diversity enabled it reports Not Detected only if both the Active and Inactive CMUs fail to demodulate. It gives a combined, protection-aware view rather than just one unit's individual status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.26.26 snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::endWirelessReceiveSignalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.26.26.1 snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::endWirelessReceiveSignalStatus.1
Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::endWirelessReceiveSignalStatus OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.8 | ptp800 | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.26 | protectionStatus | CAMBIUM-PTP800-MIB |
| 1.3.6.1.4.1.17713.8.26.26 | endWirelessReceiveSignalStatus | CAMBIUM-PTP800-MIB |