CAMBIUM-PTP800-MIB :: dataPortCopperForcedConfiguration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBdataPortCopperForcedConfiguration

dataPortCopperForcedConfiguration

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::dataPortCopperForcedConfiguration

OID (numeric): 1.3.6.1.4.1.17713.8.6.29

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This forces the configuration of the copper data Ethernet interface rather than using auto negotiation. THE CONFIGURATION SHOULD ONLY BE FORCED IF YOU ARE HAVING PROBLEMS WITH AUTO NEGOTIATION - AND YOU MUST ENSURE THAT YOU CONFIGURE BOTH THIS UNIT AND THE Ethernet PORT TO WHICH IT IS CONNECTED IDENTICALLY! WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not use auto negotiation together with a fixed setting at the Ethernet link partner (other end of the link)

What is dataPortCopperForcedConfiguration?

This forces the copper data Ethernet interface to a fixed speed/duplex (currently only 100 Mbps full duplex) instead of using auto negotiation. It should only be set if auto negotiation is failing, and the connected switch port must be configured identically or a duplex mismatch will result.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.29
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::dataPortCopperForcedConfiguration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.6.29.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::dataPortCopperForcedConfiguration.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::dataPortCopperForcedConfiguration OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6ethernetCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.6.29dataPortCopperForcedConfigurationCAMBIUM-PTP800-MIB