CAMBIUM-PTP800-MIB :: aTPCEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCAMBIUM-PTP800-MIBaTPCEnable

aTPCEnable

Module: CAMBIUM-PTP800-MIB

OID (symbolic): CAMBIUM-PTP800-MIB::aTPCEnable

OID (numeric): 1.3.6.1.4.1.17713.8.5.15

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Enables Automatic Transmitter Power Control (ATPC). NOTE: Use of ATPC is mandatory in some regions. When ATPC is enabled, the transmit power is dynamically adjusted to optimize link performance. The transmit power will always be adjusted within the constraints set by Maximum Transmit Power. When ATPC is disabled, the transmit power will be fixed at the level set by Maximum Transmit Power. When adaptive modulation is enabled, this setting can limit the capacity of the system by capping the modulation to a mode which is consistent with the configured Maximum Transmit Power.

What is aTPCEnable?

This shows whether Automatic Transmitter Power Control (ATPC) is turned on for the wireless link. When enabled, the unit dynamically adjusts transmit power (capped by Maximum Transmit Power) to optimize link performance; when disabled, transmit power stays fixed at the configured Maximum Transmit Power. Some regulatory regions require ATPC to be enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.8.5.15
snmpwalk -v2c -c public <target> CAMBIUM-PTP800-MIB::aTPCEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.8.5.15.1
snmpget -v2c -c public <target> CAMBIUM-PTP800-MIB::aTPCEnable.1

Start monitoring Cambium Networks PTP 800 licensed microwave wireless bridge with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP800-MIB::aTPCEnable OID value, configure state conditions and alerts, and monitor any Cambium Networks PTP 800 licensed microwave wireless bridge from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.17713cambiumCAMBIUM-PMP80211-MIB
Numeric OIDNameModule
1.3.6.1.4.1.17713.8ptp800CAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.5configurationCAMBIUM-PTP800-MIB
1.3.6.1.4.1.17713.8.5.15aTPCEnableCAMBIUM-PTP800-MIB