All MIBs › CAMBIUM-PTP250-MIB › noiseFloor
noiseFloor
Module: CAMBIUM-PTP250-MIB
OID (symbolic): CAMBIUM-PTP250-MIB::noiseFloor
OID (numeric): 1.3.6.1.4.1.17713.250.5.15
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Noise floor expressed in tenths of a dBm
What is noiseFloor?
Reports the measured background radio noise level, expressed in tenths of a dBm, which sets the baseline the receive signal must exceed for a usable link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.17713.250.5.15 snmpwalk -v2c -c public <target> CAMBIUM-PTP250-MIB::noiseFloor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.17713.250.5.15.1 snmpget -v2c -c public <target> CAMBIUM-PTP250-MIB::noiseFloor.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> noiseFloor.1
Start monitoring Cambium Networks wireless bridges with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-PTP250-MIB::noiseFloor OID value, configure state conditions and alerts, and monitor any Cambium Networks wireless bridges from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.17713 | cambium | CAMBIUM-PMP80211-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.17713.250 | ptp250 | CAMBIUM-PTP250-MIB |
| 1.3.6.1.4.1.17713.250.5 | phyStatus | CAMBIUM-PTP250-MIB |
| 1.3.6.1.4.1.17713.250.5.15 | noiseFloor | CAMBIUM-PTP250-MIB |