All MIBs › BW-BroadworksApplicationServer › bwSipStatsAnswerSignalDelay
bwSipStatsAnswerSignalDelay
Module: BW-BroadworksApplicationServer
OID (symbolic): BW-BroadworksApplicationServer::bwSipStatsAnswerSignalDelay
OID (numeric): 1.3.6.1.4.1.6431.1.2.9.1.47
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: This gauge measures the average time (in milliseconds) between the receipt of a 200 OK message indicating answer or a NTFY off-hook indicating answer and the transmission of a 200 OK indicating answer to the originator. This measurement is intended to reflect internal queuing, scheduling, and processing delays. This gauge is applicable to only the SIP originated calls for which the setup-signal delay is measured. Answer signal delay is not measured when the call has been forwarded, redirected, or when the call has encountered route advancing
What is bwSipStatsAnswerSignalDelay?
This gauge measures the average time in milliseconds between receiving an indication that a call was answered (a 200 OK or an off-hook NOTIFY) and forwarding that answer indication on to the caller. Per the source it applies only to SIP-originated calls that also have a setup-signal delay measured, and is not tracked when a call was forwarded, redirected, or route-advanced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6431.1.2.9.1.47 snmpwalk -v2c -c public <target> BW-BroadworksApplicationServer::bwSipStatsAnswerSignalDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6431.1.2.9.1.47.1 snmpget -v2c -c public <target> BW-BroadworksApplicationServer::bwSipStatsAnswerSignalDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6431.1.2.9.1.47.1 i <value>
Start monitoring BroadSoft application servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BW-BroadworksApplicationServer::bwSipStatsAnswerSignalDelay OID value, configure state conditions and alerts, and monitor any BroadSoft application servers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6431 | broadsoft | BroadworksFault |
| 1.3.6.1.4.1.6431.1 | broadworks | BroadworksFault |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6431.1.2 | executionServer | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.9 | sipModule | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.9.1 | sipStats | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.9.1.47 | bwSipStatsAnswerSignalDelay | BW-BroadworksApplicationServer |