All MIBs › BW-BroadworksApplicationServer › bwMGCPStatsAnswerSignalDelay
bwMGCPStatsAnswerSignalDelay
Module: BW-BroadworksApplicationServer
OID (symbolic): BW-BroadworksApplicationServer::bwMGCPStatsAnswerSignalDelay
OID (numeric): 1.3.6.1.4.1.6431.1.2.1.1.34
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: This gauge measures the average time (in milliseconds) between the receipt of a 200 OK message indicating answer or a NTFY off-hook indicating answer and the transmission of a MDCX indicating answer to the originator. This measurement is intended to reflect internal queuing, scheduling, and processing delays. This gauge is applicable to only the MGCP originated calls for which the setup-signal delay is measured. Answer signal delay is not measured when the call has been forwarded, redirected, or when the call has encountered route advancing.
What is bwMGCPStatsAnswerSignalDelay?
Measures the average delay, in milliseconds, between the Application Server detecting that a call was answered, via a SIP 200 OK or an MGCP NTFY off-hook, and sending the MDCX command that connects media to the originator. It only applies to MGCP-originated calls that also have a setup-signal delay measurement, and is not measured for calls that were forwarded, redirected, or route-advanced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6431.1.2.1.1.34 snmpwalk -v2c -c public <target> BW-BroadworksApplicationServer::bwMGCPStatsAnswerSignalDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6431.1.2.1.1.34.1 snmpget -v2c -c public <target> BW-BroadworksApplicationServer::bwMGCPStatsAnswerSignalDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6431.1.2.1.1.34.1 i <value>
Start monitoring BroadSoft application servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BW-BroadworksApplicationServer::bwMGCPStatsAnswerSignalDelay OID value, configure state conditions and alerts, and monitor any BroadSoft application servers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6431 | broadsoft | BroadworksFault |
| 1.3.6.1.4.1.6431.1 | broadworks | BroadworksFault |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6431.1.2 | executionServer | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.1 | mgcpModule | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.1.1 | mgcpStats | BW-BroadworksApplicationServer |
| 1.3.6.1.4.1.6431.1.2.1.1.34 | bwMGCPStatsAnswerSignalDelay | BW-BroadworksApplicationServer |