All MIBs › BROCADE-SYSTEM-MIB › swFlashDLAdmStatus
swFlashDLAdmStatus
Module: BROCADE-SYSTEM-MIB
OID (symbolic): BROCADE-SYSTEM-MIB::swFlashDLAdmStatus
OID (numeric): 1.3.6.1.4.1.1588.2.1.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The state of the FLASH. o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed.
The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0.
Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload.
What is swFlashDLAdmStatus?
Reports the state of a FLASH firmware/config transfer using the same swCurrent/swFwUpgrade/swCfUpload/swCfDownload/swFwCorrupted values as swFlashDLOperStatus; per the source description, transfers are driven by first setting the host, user, and file name (swFlashDLHost.0, swFlashDLUser.0, swFlashDLFile.0, defined elsewhere) and then this status, using FTP if a password is supplied via swFlashDLPassword.0 or remote shell otherwise. The swFwCorrupted(5) value is informational only; the source notes that setting this object to swFwCorrupted is not allowed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.12 snmpwalk -v2c -c public <target> BROCADE-SYSTEM-MIB::swFlashDLAdmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.12.1 snmpget -v2c -c public <target> BROCADE-SYSTEM-MIB::swFlashDLAdmStatus.1
Start monitoring Brocade SAN/Fibre Channel and Ethernet switching platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-SYSTEM-MIB::swFlashDLAdmStatus OID value, configure state conditions and alerts, and monitor any Brocade SAN/Fibre Channel and Ethernet switching platforms from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1588 | bcsi | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2 | commDev | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1 | fibrechannel | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1 | fcSwitch | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1 | sw | SW-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.1 | swSystem | BROCADE-SYSTEM-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.1.12 | swFlashDLAdmStatus | BROCADE-SYSTEM-MIB |