All MIBs › BROCADE-SYSTEM-MIB › swFCPortLinkState
swFCPortLinkState
Module: BROCADE-SYSTEM-MIB
OID (symbolic): BROCADE-SYSTEM-MIB::swFCPortLinkState
OID (numeric): 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop); disabled(2) - the port is not allowed to participate in the FC-PH protocol with its attached port(s); loopback(3) - the port may transmit frames through an internal path to verify the health of the transmitter and receiver path.
Note that when the port's link state changes, its operational status (swFCPortOpStatus) will be affected.
What is swFCPortLinkState?
Holds the requested link state for this port and can be set to enabled (participate in FC-PH protocol with the attached port or loop), disabled (not allowed to participate), or loopback (internally loop transmit back to receive to test the transceiver path). The source description notes that changing this affects swFCPortOpStatus for the same port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 snmpwalk -v2c -c public <target> BROCADE-SYSTEM-MIB::swFCPortLinkState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6.1 snmpget -v2c -c public <target> BROCADE-SYSTEM-MIB::swFCPortLinkState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6.1 i <value>
Start monitoring Brocade SAN/Fibre Channel and Ethernet switching platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-SYSTEM-MIB::swFCPortLinkState OID value, configure state conditions and alerts, and monitor any Brocade SAN/Fibre Channel and Ethernet switching platforms from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1588 | bcsi | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2 | commDev | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1 | fibrechannel | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1 | fcSwitch | Brocade-REG-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1 | sw | SW-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.6 | swFCport | BROCADE-SYSTEM-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2 | swFCPortTable | BROCADE-SYSTEM-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 | swFCPortEntry | BROCADE-SYSTEM-MIB |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 | swFCPortLinkState | BROCADE-SYSTEM-MIB |