BROCADE-SYSTEM-MIB :: swDiagResult

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBROCADE-SYSTEM-MIBswDiagResult

swDiagResult

Module: BROCADE-SYSTEM-MIB

OID (symbolic): BROCADE-SYSTEM-MIB::swDiagResult

OID (numeric): 1.3.6.1.4.1.1588.2.1.1.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The result of the power-on startup (POST) diagnostics.

What is swDiagResult?

Reports the result of the switch's power-on self-test (POST) diagnostics: sw-ok(1) for a clean pass, sw-faulty(2) for a general fault, or sw-embedded-port-fault(3) for a fault isolated to an embedded port. An admin checks this after a reboot to confirm the switch passed its startup self-check.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.20
snmpwalk -v2c -c public <target> BROCADE-SYSTEM-MIB::swDiagResult

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1588.2.1.1.1.1.20.1
snmpget -v2c -c public <target> BROCADE-SYSTEM-MIB::swDiagResult.1

Start monitoring Brocade SAN/Fibre Channel and Ethernet switching platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROCADE-SYSTEM-MIB::swDiagResult OID value, configure state conditions and alerts, and monitor any Brocade SAN/Fibre Channel and Ethernet switching platforms from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1588bcsiBrocade-REG-MIB
1.3.6.1.4.1.1588.2commDevBrocade-REG-MIB
1.3.6.1.4.1.1588.2.1fibrechannelBrocade-REG-MIB
1.3.6.1.4.1.1588.2.1.1fcSwitchBrocade-REG-MIB
1.3.6.1.4.1.1588.2.1.1.1swSW-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1588.2.1.1.1.1swSystemBROCADE-SYSTEM-MIB
1.3.6.1.4.1.1588.2.1.1.1.1.20swDiagResultBROCADE-SYSTEM-MIB