All MIBs › BROADCOM-POWER-ETHERNET-MIB › agentPethPowerUpMode
agentPethPowerUpMode
Module: BROADCOM-POWER-ETHERNET-MIB
OID (symbolic): BROADCOM-POWER-ETHERNET-MIB::agentPethPowerUpMode
OID (numeric): 1.3.6.1.4.1.4526.10.15.1.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Describes the power up mode used by the PSE Port. A value of 802dot3af(0) means port is powered in IEEE 802.3af mode. A value of high-inrush(1) means port is powered used high-inrush current, used by legacy PD's A value of pre-802dot3at(2) means port is powered in IEEE 802.3af mode initially, switched to high-power IEEE 802.3at mode before 75msec. This mode needs to be used if PSE is NOT performing Layer 2 Classification Or PSE is performing 2-Event Layer 1 Classification. A value of 802dot3at(3) means is port is powered in IEEE 802.3at mode. i.e. if class detected by PSE is not class4 then PSE port will not power up the PD.
What is agentPethPowerUpMode?
Selects the power-up sequencing mode for this PSE port: 802.3af mode(0), legacy high-inrush mode(1) for older powered devices, a pre-802.3at mode(2) that starts in 802.3af then switches to high-power 802.3at within 75ms, or full 802.3at mode(3) which only powers up devices detected as class 4.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.11 snmpwalk -v2c -c public <target> BROADCOM-POWER-ETHERNET-MIB::agentPethPowerUpMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.11.1 snmpget -v2c -c public <target> BROADCOM-POWER-ETHERNET-MIB::agentPethPowerUpMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.15.1.1.1.11.1 i <value>
Start monitoring Netgear PoE switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROADCOM-POWER-ETHERNET-MIB::agentPethPowerUpMode OID value, configure state conditions and alerts, and monitor any Netgear PoE switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.15 | fastPathpowerEthernetMIB | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1 | agentPethObjects | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1 | agentPethPsePortTable | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1.1 | agentPethPsePortEntry | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1.1.11 | agentPethPowerUpMode | BROADCOM-POWER-ETHERNET-MIB |