All MIBs › BROADCOM-POWER-ETHERNET-MIB › agentPethFaultStatus
agentPethFaultStatus
Module: BROADCOM-POWER-ETHERNET-MIB
OID (symbolic): BROADCOM-POWER-ETHERNET-MIB::agentPethFaultStatus
OID (numeric): 1.3.6.1.4.1.4526.10.15.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action.
What is agentPethFaultStatus?
Reports the specific fault currently affecting this PSE port: none(0) if healthy, mpsAbsent(1) if main power supply is missing, short(2) for a detected short circuit, overload(3) if the connected device drew more power than the hardware allows, or powerDenied(4) if power was withheld due to a power shortage or admin action.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.9 snmpwalk -v2c -c public <target> BROADCOM-POWER-ETHERNET-MIB::agentPethFaultStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.9.1 snmpget -v2c -c public <target> BROADCOM-POWER-ETHERNET-MIB::agentPethFaultStatus.1
Start monitoring Netgear PoE switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BROADCOM-POWER-ETHERNET-MIB::agentPethFaultStatus OID value, configure state conditions and alerts, and monitor any Netgear PoE switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.15 | fastPathpowerEthernetMIB | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1 | agentPethObjects | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1 | agentPethPsePortTable | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1.1 | agentPethPsePortEntry | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1.1.9 | agentPethFaultStatus | BROADCOM-POWER-ETHERNET-MIB |