BRCM-TELNET-MGMT-MIB :: telnetHackerInactivityTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BRCM-TELNET-MGMT-MIB › telnetHackerInactivityTimeout

telnetHackerInactivityTimeout

Module: BRCM-TELNET-MGMT-MIB

OID (symbolic): BRCM-TELNET-MGMT-MIB::telnetHackerInactivityTimeout

OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.1.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object controls the length of time after which an entry in the telnetHackerTable will be removed if there are no further attempts to access the system from the corresponding telnetHackerAddress. Note that if this object is set to zero, the telnetHackerTable will be effectively disabled and no IP addresses will be blacklisted for unauthorized access. If set to -1, entries in the telnetHackerTable will never be aged out and once blacklisted, only a system reboot will allow another attempted login from the blacklisted address.

What is telnetHackerInactivityTimeout?

Controls how long an entry for a suspicious remote host remains in the telnetHackerTable without a new access attempt before being automatically removed. Setting this to zero keeps entries in the table permanently.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.1.12
snmpwalk -v2c -c public <target> BRCM-TELNET-MGMT-MIB::telnetHackerInactivityTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.1.12.1
snmpget -v2c -c public <target> BRCM-TELNET-MGMT-MIB::telnetHackerInactivityTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.1.12.1 i <value>

Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-TELNET-MGMT-MIB::telnetHackerInactivityTimeout OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.50brcmCableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1cableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1cableDataMgmtBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1.2cableDataMgmtMIBBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1cableDataMgmtMIBObjectsBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.1cableDataMgmtBaseBRCM-CABLEDATA-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.50.1.1.2.1.1.1telnetMgmtBRCM-TELNET-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.1.1.12telnetHackerInactivityTimeoutBRCM-TELNET-MGMT-MIB