BRCM-PING-MGMT-MIB :: pingPktStepSize

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BRCM-PING-MGMT-MIB › pingPktStepSize

pingPktStepSize

Module: BRCM-PING-MGMT-MIB

OID (symbolic): BRCM-PING-MGMT-MIB::pingPktStepSize

OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.1.5.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Specifies the number of bytes by which each subsequent ping packet is incremented.

The step amount can be any number from 0 (which leaves the ping size constant) up to (2^32 - 1). Note that after adding the step amount to the current ping size, if this is greater than the end size, then the current size will be wrapped around to the start size.

If you want to send ping packets of the same size every time, set the start and end size to be equal, and the step amount to be 0.

To do a sweeping ping of every packet size, set start to 64, end to 1518, and step amount to 1. You can set step amount to -1 to sweep in the other direction.

This object may be changed while a ping is in progress.

What is pingPktStepSize?

Defines how many bytes to add to each successive ping packet size when sweeping through a range of sizes. A value of 0 keeps all packets the same size.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.5.6
snmpwalk -v2c -c public <target> BRCM-PING-MGMT-MIB::pingPktStepSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.5.6.1
snmpget -v2c -c public <target> BRCM-PING-MGMT-MIB::pingPktStepSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.1.5.6.1 i <value>

Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-PING-MGMT-MIB::pingPktStepSize OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.50brcmCableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1cableDataBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1cableDataMgmtBRCM-CABLEDATA-SMI
1.3.6.1.4.1.4413.50.1.1.2cableDataMgmtMIBBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1cableDataMgmtMIBObjectsBRCM-CABLEDATA-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.1cableDataMgmtBaseBRCM-CABLEDATA-MGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.50.1.1.2.1.1.5pingMgmtBRCM-PING-MGMT-MIB
1.3.6.1.4.1.4413.50.1.1.2.1.1.5.6pingPktStepSizeBRCM-PING-MGMT-MIB