All MIBs › BRCM-BATTERY-MGMT-MIB › battPowerMgmtCmDelay
battPowerMgmtCmDelay
Module: BRCM-BATTERY-MGMT-MIB
OID (symbolic): BRCM-BATTERY-MGMT-MIB::battPowerMgmtCmDelay
OID (numeric): 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Specifies the number of seconds following transition to battery power before the DOCSIS CM interface will enter power management mode. If set to -1, the interface will never enter power management mode and will remain at full power until utility power is restored or battery charge is depleted.
What is battPowerMgmtCmDelay?
A configurable delay (in seconds) that specifies how long the device waits after switching to battery power before putting the DOCSIS cable modem interface into power-saving mode. Setting this to -1 disables power management, keeping the interface at full power until utility power returns.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1.1 snmpwalk -v2c -c public <target> BRCM-BATTERY-MGMT-MIB::battPowerMgmtCmDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1.1.1 snmpget -v2c -c public <target> BRCM-BATTERY-MGMT-MIB::battPowerMgmtCmDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1.1.1 i <value>
Start monitoring Broadcom-chipset DOCSIS cable modems/gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BRCM-BATTERY-MGMT-MIB::battPowerMgmtCmDelay OID value, configure state conditions and alerts, and monitor any Broadcom-chipset DOCSIS cable modems/gateways from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.50 | brcmCableData | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1 | cableData | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1.1 | cableDataMgmt | BRCM-CABLEDATA-SMI |
| 1.3.6.1.4.1.4413.50.1.1.2 | cableDataMgmtMIB | BRCM-CABLEDATA-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1 | cableDataMgmtMIBObjects | BRCM-CABLEDATA-MGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.50.1.1.2.1.10 | batteryMgmt | BRCM-BATTERY-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1.10.3 | batteryPowerMgmt | BRCM-BATTERY-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1 | batteryPowerMgmtInterfaces | BRCM-BATTERY-MGMT-MIB |
| 1.3.6.1.4.1.4413.50.1.1.2.1.10.3.1.1 | battPowerMgmtCmDelay | BRCM-BATTERY-MGMT-MIB |