BOUNDARY-ACCESSS-NODE-MIB :: ibmBANinOthers

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BOUNDARY-ACCESSS-NODE-MIB › ibmBANinOthers

ibmBANinOthers

Module: BOUNDARY-ACCESSS-NODE-MIB

OID (symbolic): BOUNDARY-ACCESSS-NODE-MIB::ibmBANinOthers

OID (numeric): 1.3.6.1.4.1.2.6.119.4.12.1.1.20

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: Count of other packets not counted by the other incoming counters.

What is ibmBANinOthers?

Counts incoming packets on this port that do not fall into any of the other specific inbound frame-type counters.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.12.1.1.20
snmpwalk -v2c -c public <target> BOUNDARY-ACCESSS-NODE-MIB::ibmBANinOthers

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.12.1.1.20.1
snmpget -v2c -c public <target> BOUNDARY-ACCESSS-NODE-MIB::ibmBANinOthers.1

Start monitoring IBM Boundary Access Node bridge/router (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BOUNDARY-ACCESSS-NODE-MIB::ibmBANinOthers OID value, configure state conditions and alerts, and monitor any IBM Boundary Access Node bridge/router (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
1.3.6.1.4.1.2.6.119ibmIROCIBMIROCDIALOUT-MIB
1.3.6.1.4.1.2.6.119.4ibmIROCroutingIBMIROCDIALOUT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.119.4.12ibmBANMIBBOUNDARY-ACCESSS-NODE-MIB
1.3.6.1.4.1.2.6.119.4.12.1ibmBANTableBOUNDARY-ACCESSS-NODE-MIB
1.3.6.1.4.1.2.6.119.4.12.1.1ibmBANEntryBOUNDARY-ACCESSS-NODE-MIB
1.3.6.1.4.1.2.6.119.4.12.1.1.20ibmBANinOthersBOUNDARY-ACCESSS-NODE-MIB

Module

This MIB depends on