All MIBs › BLADETYPE4-NETWORK-MIB › rip2NewCfgState
rip2NewCfgState
Module: BLADETYPE4-NETWORK-MIB
OID (symbolic): BLADETYPE4-NETWORK-MIB::rip2NewCfgState
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Globally turn RIP on or off.
What is rip2NewCfgState?
Controls the global enable or disable state of RIP in the pending configuration. Setting this to enabled will activate RIP routing across all configured interfaces when the configuration is applied.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2 snmpwalk -v2c -c public <target> BLADETYPE4-NETWORK-MIB::rip2NewCfgState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2.1 snmpget -v2c -c public <target> BLADETYPE4-NETWORK-MIB::rip2NewCfgState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2.1 i <value>
Start monitoring HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE4-NETWORK-MIB::rip2NewCfgState OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.4 | hpSwitchModuleBladetype4 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2 | hpSwitchBladeType4_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3 | layer3 | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1 | layer3Configs | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18 | rip2Cfg | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3 | ripGeneral | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2 | rip2NewCfgState | BLADETYPE4-NETWORK-MIB |