All MIBs › BLADETYPE4-NETWORK-MIB › dot1xNewStatus
dot1xNewStatus
Module: BLADETYPE4-NETWORK-MIB
OID (symbolic): BLADETYPE4-NETWORK-MIB::dot1xNewStatus
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Dot1x status
What is dot1xNewStatus?
This read-write object allows an administrator to set the desired (pending) 802.1X port-based authentication status on the blade switch. The new status becomes active after the configuration is committed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2 snmpwalk -v2c -c public <target> BLADETYPE4-NETWORK-MIB::dot1xNewStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2.1 snmpget -v2c -c public <target> BLADETYPE4-NETWORK-MIB::dot1xNewStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2.1 i <value>
Start monitoring HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE4-NETWORK-MIB::dot1xNewStatus OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 4 / ProLiant GbE2c Interconnect Switch from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.4 | hpSwitchModuleBladetype4 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2 | hpSwitchBladeType4_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2 | layer2 | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1 | layer2Configs | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11 | dot1x | BLADETYPE4-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2 | dot1xNewStatus | BLADETYPE4-NETWORK-MIB |